Company Blog 2025-06-15

How To Maintain The Briquette Machine?

Briquette machine is a very popular equipment in the current market. The gas equipment is environmentally friendly and energy saving. But in the process of continuous operation. Will produce a certain amount of loss. If the operator installs the operating instructions standardised operation. Only the bar making machine needs regular maintenance. Drying and carbonisation ovens are usually different. The wearing parts of the briquette machine are the propeller screw, the matching forming cylinder, the heating ring, and so on.


Pusher: The pusher is the power accessory for bar production. This part requires regular maintenance or repair treatment. The pusher punch needs to be welded after a long time of thermal wear. This is mainly due to the constant impact moulding of the raw material. This causes wear and tear on the thruster. Maintenance time is: 8-12 hours once.

Rod making sleeve: The forming sleeve of rod making machine has vibration phenomenon at the moment when the rod comes out. At the same time, some raw material dust will fall into the bottom of the moulding sleeve. It is necessary to clear the dust on the rod-making sleeve. If it is not cleaned for a long time. It will cause the charcoal machine sleeve to be taut. It is difficult to produce the rods. Therefore, it is recommended to clean the sleeve for 3 hours.

Heating ring: The heating ring is to improve the moulding density of the raw material under impact. The heating ring produces chemical thermal reaction to the raw material. Some raw materials will be attached. If the heating ring is full of raw materials. Its chemical heating reaction will be completely lost. Therefore, we need to clean the heating ring regularly. Usually 2-3 hours once.

 
How To Maintain The Briquette Machine?


The above is the maintenance work of the briquette  machine. Thus ensuring the charcoal making machine to produce mechanism charcoal better.
Share: