Charcoal Making Machine Service Life

When many customers buy charcoal making machine, they will ask: how long is the service life of charcoal making machine? According to the service life of the equipment can bring how much profit for themselves in the limited period. The service life of any product is decided according to the maintenance of each person. If you follow the charcoal making machine use process and maintenance guidelines, then the charcoal making machine service life will increase. If in the case of poor care and maintenance. It will shorten the service life, and it will also affect the production efficiency of customers.

 

New charcoal making machine service life:

The charcoal making machine is composed of: crusher, grinder, dryer, briquette machine, carbonisation furnace and other equipment. Each piece of equipment is used in a very different environment. The carbonisation furnace needs to go through a high temperature of 500℃. The briquette machine has to go through high temperature, high pressure and friction. Therefore, the service life of different parts of each equipment is not consistent. The propellers of the briquette machine need to be repaired and treated frequently. Continuous production line can be ensured. Typically. The propeller of the briquette machine is repaired about once every 10 days. The specific needs to be decided according to the working hours. In addition, the blades of the wood crusher will be worn out after a certain time of production. After fixing it, you can continue to use it. If there is more serious wear, you need to replace the parts again.
  Based on our past customer experience, the normal use of the new charcoal making machine. The service life of five years is no problem. Some customers with better maintenance, the production of seven or eight years of equipment has also been running normally. In order to improve the service life of the charcoal making machine. Our manufacturers will provide customers with operating instructions and maintenance methods. For example: don't heat the briquette machine too fast. When you first turn on the machine, do not adjust the temperature controller directly to 300℃. Heating up too fast, although it can produce quickly, but it is very bad for the forming cylinder of the briquette machine, and heating up too fast for a long time will easily lead to the softening of the steel and other conditions, which will speed up the degree of wear and tear. When the briquette machine starts to work, it can be adjusted to 100℃ first to gradually increase the temperature. Waiting time to reach the predetermined temperature. And then carry out production. This will increase the service life.


Different operators and operating methods will directly determine the service life of the charcoal making machine. The staff should have a detailed understanding of the structure and workflow of the charcoal making machine. Determine the correct use of the charcoal making machine and maintenance can extend the service life of the charcoal making machine.

• Perv: How To Maintain The Briquette Machine?
• Newxt: What Is The Cost Of Charcoal Making Machine?