Air Flow Dryer

Air Flow Dryer

The air flow dryer is widely used for drying powder-like material. The humidity can be controlled at 10-16%. It is a kind of highly efficient, continuous, and fast solid fluidised drying method. Loose powdery or granular materials are dispersed and suspen

  • Capacity: 500kg/h-2000kg/h
  • Raw Materials: Sawdust, coconut shells, rice husk, bamboo shavings, straw, nut shells, coffee shells, peanut shells
Send Email Get Quote

Product Details

The air flow dryer is widely used for drying powder-like material. The humidity can be controlled at 10-16%. It is a kind of highly efficient, continuous, and fast solid fluidised drying method. Loose powdery or granular materials are dispersed and suspended in the hot air. The entrainment of the airflow will instantly remove the moisture from the material. There are many kinds of combinations of airflow dryers: unipolar airflow dryer, bipolar airflow dryer, pulse airflow dryer, and positive and negative pressure two-stage airflow dryer. It is suitable for the drying of powder and granular material surfaces with a range of material particle sizes: between 5 μm~0.5mm.

 

Pulse airflow dryer is the most popular among users. Adopting the principle of instant drying. The use of heat-carrying air involves rapid movement. Driving wet materials, wet materials suspended in the hot air, strengthening the whole drying process, and improving the rate of heat transfer medium. After the airflow dryer dries the materials. Moisture can be taken out almost completely. Secondly, the output is not a general dryer drying efficiency significantly improved.

 

Airflow dryer is widely used in food, medicine, chemical, fermentation, and other industries.
 

Air Flow Dryer

Technological Process

The wet material enters the air dryer at the same time as the heated natural air through the conveyor. The two are mixed and fully exchanged. Thus, the purpose of evaporation and drying is achieved in a short time. Wet material in the hot air flow. Each particle is surrounded by hot air. Thus, the material and the hot air flow to a greater extent to make full contact. After drying, the material is discharged from the cyclone collector under negative pressure. A very small portion of the micro-particles is fully recycled by the cyclone dust collector and pulse dust collector.



 

Parameters

Model Furnace internal dimensions Thicknesses
JMHGJ-800 Ф0.8m*1.5m 6mm
JMHGJ-1000 Ф1m*1.5m 6mm
JMHGJ-1200 Ф1.2m*1.5m 6mm
JMHGJ-1500 Ф1.5m*1.5m 8mm

Advantageous

1. High drying efficiency and strong processing capacity. Equipment occupies a small area, small investment. Low production cost.

2. Good quality of drying products, high automation. The drying part is not in contact with the outside world. Low pollution.

3. Customised configuration of process equipment according to the conditions and nature of the materials.

4. automatically adjust the feeding volume and air intake of the drying system. Ensure the moisture of the material is stable.
Any
Query? Let
Us Know.

* We will keep your information safe throughout the process.