Vertical lifting carbonisation furnace is using advanced airflow carbonisation. It can produce all kinds of biomass charcoal. The carbonisation furnace has convenient operation, environmental protection and energy saving, high production efficiency...
Vertical lifting carbonisation furnace is made of furnace body, furnace cover, heating pipe and exhaust pipe. There is a carbonisation liner installed in the furnace body. On the top of the carbonisation furnace there is a lid installed. Lifting lugs are installed on the side of the carbonisation liner, the top lid and the furnace lid. The exterior of the furnace is made of thick steel plates and refractory bricks. The outer furnace is made of steel plate in the shape of a cylinder. The interior is inlaid with refractory bricks. The inner chamber is loadable and made of high temperature resistant steel plate. It can be equipped with lifting crane, which can lift the inner furnace automatically and can improve the production efficiency. It can also save labour production cost.
Put the charring raw material into the charring furnace. Then seal the furnace door. Then light the fire from the bottom of the furnace body. The inside of the charring furnace starts to heat up to reach the set temperature. The whole carbonisation process can last for 6-8 hours. When the furnace body reaches the carbonisation temperature, it cools down. Charcoal is produced from the carbonised material. Thus the door of the furnace is opened. The finished charcoal can be taken out.
| Model | Furnace internal dimensions | Thicknesses |
| DZTHL-800 | Ф0.8m*1.5m | 6mm |
| DZTHL-1000 | Ф1m*1.5m | 6mm |
| DZTHL-1200 | Ф1.2m*1.5m | 6mm |
| DZTHL-1500 | Ф1.5m*1.5m | 8mm |
Sawdust briquette machine utilises raw materials such as sawdust, crops, straw, bagasse and so on. After crushing, the raw materials are processed into hollow bar body in high temperature and high pressure area.
Charcoal Briquette Extruder Machine is also called coal stick extruder. Adopting the principle of spiral extrusion. It is a coal bar moulding equipment that compresses the modulated coal powder into a prefabricated shape with a certain strength.
Bamboo chips are the main raw material. After drying in the drying machine, the material is dry and wet properly. After cooling, the material passes through the bamboo charcoal machine. After high temperature, high pressure and plasticisation.
Continuous carbonisation furnace is a new type of charcoal production equipment. He can be used to produce large-scale rice husk charcoal, sawdust charcoal, coconut shell charcoal, nut shells and so on. Through the oxygen-free carbonisation and dry distil
Horizontal Carbonisation Furnace Also known as charcoal making machine. It can carbonise all kinds of raw materials. The equipment adopts new high temperature dry distillation pyrolysis carbonisation technology.
Vertical lifting carbonisation furnace is using advanced airflow carbonisation. It can produce all kinds of biomass charcoal. The carbonisation furnace has convenient operation, environmental protection and energy saving, high production efficiency...
Sawdust dryer refers to put the powder granular wet sawdust. After high temperature hot airflow conveying and dispersing. So that the moisture in the material is evaporated.
The air flow dryer is widely used for drying powder-like material. The humidity can be controlled at 10-16%. It is a kind of high efficient, continuous and fast solid fluidised drying method.