Coconut Shell Carbonization Furnace

The coconut shell carbonization furnace is a fully automatic charcoal-making equipment. Its carboniszation raw materials are rich and diverse. Including: agricultural waste, industrial trimmings, and so on. Through the carbonization mechanism to produce..

Capacity: 500kg/h-2000kg/h
Raw Materials: Sawdust, coconut shells, rice husk, bamboo shavings, straw, nut shells, coffee shells, peanut shells

Send Email Get Quote

Product Details

The coconut shell carbonization furnace is a fully automatic charcoal-making equipment. Its carbonization raw materials are rich and diverse. Including: agricultural waste, industrial trimmings, and so on. Through the carbonization mechanism to produce raw material charcoal (coconut shell charcoal, rice husk charcoal, bamboo shavings charcoal, peanut shell charcoal, fruit shell charcoal, etc.). The material produced by the coconut shell carbonization furnace is clean, smokeless, non-toxic, and plastic.

Coconut shell carbonization furnace can be raw materials such as wood chips, rice husk, coconut shell, coffee grounds, straw, peanut shell, sunflower skin, wine trough, apricot skin, and so on. It is mainly applied to materials with small volume, such as powder and granules. If the raw materials are large pieces of agricultural waste, branches, logs, fruit wood, shavings, etc.. It is not possible to use the coconut shell carbonization furnace to carbonise directly. It needs to be crushed into powder or granules by using a wood crusher first. Thus, meeting the raw materials that meet the production requirements. If the humidity of the wood is too high. You can choose natural air drying or use a sawdust dryer to reduce the humidity of raw materials. To ensure the best charring effect.

Coconut shell carbonisation furnace finished charcoal

Technological Process

Drying stage: The main purpose is to remove moisture from the raw material. As the temperature inside the furnace body gradually increases. The moisture in the biomass raw material decreases. Thus, the raw material is dried. If the humidity of the raw material is lower, the charring rate of the finished product will be higher. Thus, better quality charcoal can be produced.

Pyrolysis stage: Pyrolysis of materials such as wood and coconut shells produces components such as wood tar, wood vinegar, and combustible gases. It can be paired with a purification tank to achieve separation and purification. The purified combustible gas is finally obtained. It can be returned to the coconut shell activated carbon combustion chamber to be burned as fuel.

Carbonization stage: when the temperature inside the furnace reaches above 300℃. The biomass raw material starts to carbonise. Meet the three conditions of raw material combustion: heat source, oxygen, combustible material. Therefore, the coconut shell carbonization furnace adopts a closed environment. That is, oxygen-poor or oxygen-free atmosphere conditions. Biomass carbonisation occurs in the furnace body.

Cooling stage: after carbonization, the carbon material. The temperature is high. Need to go through the cooling machine to cool the material to 50℃-80℃. Thus, complete the discharge. Into the next process.

The coconut shell carbonization furnace is set up with three functional zones: preheating zone, high temperature zone, and low temperature zone. Carbonization mainly occurs in the high-temperature zone. Equipped with an observation window. It can observe the combustion situation in the combustion chamber in real time. It can be equipped with a PLC intelligent control system, a precise temperature control system, an oxygen monitoring system, and so on.

Parameters

Model	Furnace internal dimensions	Thicknesses
YKTHL-800	Ф0.8m*1.5m	6mm
YKTHL-1000	Ф1m*1.5m	6mm
YKTHL-1200	Ф1.2m*1.5m	6mm
YKTHL-1500	Ф1.5m*1.5m	8mm

Advantageous

1. Coconut shell carbonization furnace can carbonise a rich variety of raw materials: coconut shell, walnut shell, chestnut shell, fruit shell, palm shell, and so on.

2. The carbonization furnace can achieve continuous feeding and discharging. Greatly improve the carbonization efficiency.

3. Adopting a brand-new technical process. In the process of carbonization , it does not produce smoke, dust and waste water, and gas. It meets the standard of environmental protection requirements.

4. No need to add any chemical additives in the carbonization process. It is non-toxic, odourless, and pollution-free.

5. The carbonization furnace is made with excellent technology. The production speed is faster, and the carbonization effect is better.