Charcoal Briquette Extruder Machine

Charcoal briquette extruder machine is also called coal stick extruder. Adopting the principle of spiral extrusion. It is a coal bar forming equipment that compresses the modulated coal powder into a prefabricated shape with a certain strength. The coal rods made by using the coal rod machine can make full use of the coal rods. There is no need to mix lime in the production process. Not only reduces the cost of fuel. And increase the heat content of coal. It has high economic benefits. It can effectively use cheap coal dust, thus replacing high-priced coal briquettes. It can reduce the production cost. Improve the economic efficiency and provide a reliable guarantee.

Charcoal briquette extruder machineis the equipment to make the powder raw material into different shapes of strips. Coal bar machine is composed of: motor, barrel, screw shaft, bearing seat, coal bar mould, reducer, discharge port and so on. The motor of the coal bar machine transmits the power to the reducer through the triangular belt. The reducer transmits the power to the propeller shaft through the floating coupling. The propeller on the shaft pushes the coal out through the forming mould. Thus the ideal high pressure coal bar is produced. The charcoal powder or coal powder is compressed into a certain shape. The charcoal powder or coal powder is introduced into the hopper. It is pushed by the screw shaft. Then it is pushed forward to the discharge opening of the ball making machine. From the screw shaft to the mould set. Through high pressure, the charcoal passes through the mould. Thus it finally forms a certain shape.
 

The mould can be customized and designed after customer's demand. The shapes of the charcoal briquette moulds can be divided into: hexagonal, round, square and so on. The diameter of the charcoal briquettes ranges from 3-50mm, and customers can choose to produce hollow or solid charcoal briquettes. In addition to charcoal and coal, the charcoal briquette machine can also be used to produce raw materials such as sludge, coke, ore, cow dung, olive pomace and so on.

 

Charcoal briquette cutting machine and conveyor. The charcoal briquette extruder machine is usually equipped with an automatic cutter. It can automatically cut the briquettes into the same length. This greatly improves the production efficiency. It can also improve the appearance of briquettes. In addition, the charcoal briquette extruder machine can also be used to produce cubic water bituminous coal. But it needs to be matched with automatic cutting machine.
 

Model	Power	Capacity	Sawdust briquette diameter	Machine size
MBJ-200	11kw	400kg/h-600kg/h	30-60mm	2*1*1.1m
MBJ-300	18.5kw	800kg/h-1000kg/h	30-60mm	2.2*1.2*1.2m

1. Large feed screw lead. Fast pushing feeding speed.

2. triangular belt drive, reliable and stable operation. Low running noise and overload protection.

3. Bearing seat and cylinder body adopt rigid connection. High concentricity, push back thrust, stable and efficient machine.

4. the confidential sealing part of the coal bar adopts fault structure. Dirt can leak out through the fault.

5. The head and cylinder are connected with snap ring structure. It can be customised according to customers' requirements.