Charcoal machine is also called charcoal making machine. It is to make charcoal from waste materials containing wood fibre. The raw materials are: straw, sawdust, wood chips, rice husk, fruit shells, tree branches, fruit wood, logs and so on. Firstly, the material is crushed into about 10mm by wood crusher, and then the material is sent to the screw propeller for extrusion through rod making machine. The wood fibre is pressed into rods under high temperature and pressure. Then it will be carbonised into barbecue charcoal.
Wood crusher: first of all, it depends on the customer's raw material. If it is the trimmings, branches, straw, logs, fruit wood, etc. from the timber mill. Then you need to use the crusher. The material is larger. You can't use the rod making machine directly. You need to crush the material into granule or powder first. If it is sawdust, rice husk, wood chips and other fine materials need to use the crusher.
Dryer: After crushing the material, then use the dryer for drying. If the moisture content of the material is too large, the bar making machine is easy to cause clogging, and the bar is not shaped. The moisture content of the material should be controlled between 8% and 12%. Only then can we proceed to the next step of making charcoal.
Briquette Machine: The dried material is extruded by the screw of the charcoal briquette machine. High temperature and high pressure moulding will form charcoal. Thus, carbon rods are produced.
Carbonisation Furnace: It can be divided into horizontal carbonisation furnace and hanging vertical carbonisation furnace. The made carbon rods are sent to the carbonisation furnace. Then it is ignited and burned to. Carbonisation cycle time is about: 8-24 hours. Depending on the output, the carbonisation time is also very different. The carbonisation furnace has the advantageous features of high carbon rate, good carbonisation effect, environmental protection and energy saving.
The above is the introduction of charcoal making machine. If you want to know more detailed information about charcoal machine. Welcome to contact us.
Sawdust briquette machine utilises raw materials such as sawdust, crops, straw, bagasse and so on. After crushing, the raw materials are processed into hollow bar body in high temperature and high pressure area.
Charcoal Briquette Extruder Machine is also called coal stick extruder. Adopting the principle of spiral extrusion. It is a coal bar moulding equipment that compresses the modulated coal powder into a prefabricated shape with a certain strength.
Bamboo chips are the main raw material. After drying in the drying machine, the material is dry and wet properly. After cooling, the material passes through the bamboo charcoal machine. After high temperature, high pressure and plasticisation.
Continuous carbonisation furnace is a new type of charcoal production equipment. He can be used to produce large-scale rice husk charcoal, sawdust charcoal, coconut shell charcoal, nut shells and so on. Through the oxygen-free carbonisation and dry distil
Horizontal Carbonisation Furnace Also known as charcoal making machine. It can carbonise all kinds of raw materials. The equipment adopts new high temperature dry distillation pyrolysis carbonisation technology.
Vertical lifting carbonisation furnace is using advanced airflow carbonisation. It can produce all kinds of biomass charcoal. The carbonisation furnace has convenient operation, environmental protection and energy saving, high production efficiency...
Sawdust dryer refers to put the powder granular wet sawdust. After high temperature hot airflow conveying and dispersing. So that the moisture in the material is evaporated.
The air flow dryer is widely used for drying powder-like material. The humidity can be controlled at 10-16%. It is a kind of high efficient, continuous and fast solid fluidised drying method.