Reasons For The Decline In Capacity Of Wood Crusher

Wood crusher is the crushing equipment in the charcoal machine production line. Some customers just buy wood crusher with high using effect and productivity. But with the passage of time, after using it for a period of time. Capacity decline occurs. So why does the wood crusher use for a period of time to appear capacity decline?

Blade wear and tear
The wood crusher is to use the blade to hit the material at high speed. The key component is the blade. Blades are also wear parts. Every time and material contact, there will be a certain amount of wear and tear. After a period of time, the wood crusher blades will bring different degrees of wear. If the blades are more worn. Then the wood crusher will not crush the material as it did in the beginning. And thus the capacity of the crusher will also decline. If the crusher blade is not as sharp as it was at the beginning. The time it takes to crush the material will be longer. If there is a drop in capacity. We first need to check the blades to see if they are badly worn. We can replace the blade with a new one and the capacity will be the same as it was at the beginning.

 

Screen clogging
The crushed material and the size of the discharge size of the wood crusher. All can be controlled by the fineness size through the screen mesh. After a long time of operation, the crushed material will be attached to the screen mesh. We need to check the screen mesh regularly. If the screen mesh is clogged, the capacity of the crusher will be reduced. We need to clean the bottom screen mesh. The capacity of the wood crusher will be restored as before.

Material moisture
If the moisture content of the material is too large, the crushing degree is very fine. After a long time of operation. The wood with high humidity will be sticky and cause wear and tear to the blades of the crusher. Serious damage to the blades will reduce the capacity. The material is also easy to be attached to the inside of the equipment, the blades, the inner wall, the screen and so on. It is also prone to clogging during feeding and conveying. Under the best possible conditions, the humidity of the material is reduced first. Natural drying or drying machine can be used to operate. Avoid the reduction of machine machine capacity.

Raw material hardness
If the hardness of the raw material is too high. Resistance increases, the speed of the blade will be slowed down, and thus more difficult to crush. Crushing efficiency will be reduced. The crusher blades will also be worn out.

Therefore, when we use the wood crusher, we need to regularly check and maintain the equipment. So as to guarantee the normal capacity of the wood crusher.

• Perv: How To Control The Moisture Of Charcoal Making Machine Raw Material?
• Newxt: Is Charcoal Briquette Making Profitable?