Sawdust is the wood shavings cut down from processing wood in the industrial sector. Usually the moisture content in sawdust is high and it is not easy to preserve. It needs to be dried and processed to make wood products such as pellet board. Sawdust briquetting machine is commonly used in charcoal making production line. It can also be used in feed and fuel etc.
The sawdust produced by the wood processing plant is collected uniformly. Then use the sieving machine to preliminarily sieve out other impurities. The size of raw material should be controlled within 5-7cm.
You can choose to use a sawdust dryer or natural drying, to control the moisture of the sawdust within 13%. It is convenient for subsequent briquetting and moulding.
Feed the wood chips evenly into the feed opening of the sawdust briquetting machine. During the operation of the equipment, it is necessary to adjust various technical parameters, such as briquetting temperature, pressure size, etc.. Ensure that these parameters are controlled within the normal range, after the wood chips are compressed into rods, the rods will be automatically discharged from the discharge port. The finished product needs to be collected and stored well finished product.
If you want to get high quality sawdust rods. You need to choose a good quality briquetting machine. Regular maintenance and care of the sawdust briquetting machine is also very important. This includes cleaning the residual material inside the machine, checking and replacing worn parts, etc. This extends the service life of the equipment and ensures production efficiency and product quality.